Panasonic PT-VX610, PT-VX610A, VX610 XGA 5500 Ansi Lumens 3LCD High Brightness Projector, Office, Education, Conference Hall Usage

Panasonic PT-VX610 Bright ideas make teamwork easy

Whatever personal devices you use in spaces large or small, sharing on the big screen is now easier than ever. With wireless and single-cable solutions, Miracast, plug-and-share playback, and apps for smartphone and PC, collaborative presentations are tailored to you.

Colors Adjustment and Color Correction Functions

For the first time in a Panasonic portable, users can correct for slight color variations in the reproduction range of individual units set up for multi-projection. This is particularly useful for side-by-side configurations. Very large images can be seamlessly presented in auditoriums and boardrooms.

1.6x Zoom Lens and Lens Shift Function

Zoom lens allows you to project from wide range of distances from tabletops or ceiling. Use vertical lens shift to quickly adjust image position without distortion.

Auto Screen Image Rotation

Images are automatically* rotated depending on installation orientation—upside down on the ceiling or set on a table—using a built-in angle sensor. * Manual setting also available via setup menu.

To reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There’s no need to remove the unit from its ceiling mount for periodic maintenance.

Quick Lamp and Filter Replacement

Horizontal, Vertical, and Corner Keystone Correction

Horizontal, vertical, and corner keystone correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle.

Colors Adjustment Color Correction Functions 1.6x Zoom Lens Lens Shift Function

Auto Screen Image Rotation

Model PT-VX610 Power supply AC 120 V, 50/60 Hz (North America), AC 110 V, 60 Hz (Taiwan), AC 100–240 V, 50/60 Hz (other countries) Power consumption 385 W [North America], 400 W [other countries] Standby power consumption Standby Mode (Eco)*² 0.3 W [North America, Taiwan], 0.5 W [other countries] Standby Mode (Normal) 8 W LCD Panel Panel size 0.63 inches (1.60 cm) (4:3 aspect ratio) Display method Transparent LCD panel (× 3, R/G/B) Pixels 786,432 (1024 × 768) × 3, total of 2,359,296 pixels Lens 1.6x manual zoom (throw ratio: 1.17–1.90:1), manual focus F 1.60–1.90, f 15.31–24.64 mm Lamp 280 W UHM lamp × 1 Screen size (diagonal) 30–300 inches Brightness*³ 5,500 lm [input signal: PC, lamp power: Normal, picture mode: Dynamic, Daylight View: OFF, Auto Power Save: OFF] Center-to-corner uniformity*³ 85% Contrast*³ 16,000:1 (all white/all black) [input signal: PC, lamp power: Normal, picture mode: Dynamic, Iris: On, Daylight View: OFF, Auto Power Save: OFF] Resolution 1024 × 768 pixels (Input signals that exceed this resolution will be converted to 1024 × 768 pixels.) Scanning frequency HDMI 480/60i*⁴, 576/50i*⁴, 480/60p, 576/50p, 720/60p, 720/50p, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 1080/60i, 1080/50i, Displayable resolution: 640 x 400 to 1920 x 1200 (non-interlace), Dot clock frequency: 25 MHz to 162 MHz RGB (analog) Displayable resolution: 640 x 400 to 1920 x 1200 [non-interlace], fH: 15 kHz–91 kHz, fV: 24 Hz–100 Hz, dot clock: 162 MHz or lower YPBPR (YCBCR) fH: 15.73 kHz, fV: 59.94 Hz [480/60i], fH: 15.63 kHz, fV: 50 Hz [576/50i], fH: 31.47 kHz, fV: 59.94 Hz [480/60p], fH: 31.25 kHz, fV: 50 Hz [576/50p], fH: 45.00 kHz, fV: 60 Hz [720/60p], fH: 37.50 kHz, fV: 50 Hz [720/50p], fH: 27.00 kHz, fV: 24 Hz [1080/24p], fH: 27.00 kHz, fV: 48 Hz [1080/24sF], fH: 28.13 kHz, fV: 25 Hz [1080/25p], fH: 33.75 kHz, fV: 30 Hz [1080/30p], fH: 67.50 kHz, fV: 60 Hz [1080/60p], fH: 56.25 kHz, fV: 50 Hz [1080/50p], fH: 33.75 kHz, fV: 60 Hz [1080/60i], fH: 28.13 kHz, fV: 50 Hz [1080/50i]*, HD/SYNC and VD terminals do not support 3 value SYNC. Video fH: 15.73 kHz/15.63 kHz, fV: 59.94 Hz/50 Hz (NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM) Optical axis shift Vertical 0 to +40 % from center of screen (manual), U/D ratio on top end: 9:1 Keystone correction range Vertical: maximum ±35 ° (auto/manual, input: XGA), Horizontal: maximum ±35 ° (manual, input: XGA), Up to a total of ±55 ° during simultaneous horizontal and vertical correction. Installation Front ceiling/Front desk/Rear ceiling/Rear desk Terminals HDMI IN HDMI 19-pin × 2 (Deep Color, compatible with HDCP), audio signal: Linear PCM [sampling frequency: 48 kHz/44.1 kHz/32 kHz] COMPUTER IN 1 D-sub 15-pin (female) x 1 [RGB/Y • PB (CB) • PR (CR)] COMPUTER IN 2 / MONITOR OUT D-sub 15-pin (female) x 1 [RGB/Y • PB (CB) • PR (CR) (input/output switching)] VIDEO IN Pin jack x 1 AUDIO IN 1 M3 stereo mini jack x 1 AUDIO IN 2 M3 stereo mini jack x 1 AUDIO IN 3 Pin jack (L/R) x 1 AUDIO OUT M3 stereo mini jack x 1 (monitor out: variable) SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) USB A Type A for DC output x 1 (for power supply, DC 5 V, max. 2 A)*⁵ USB B – LAN/DIGITAL LINK – LAN RJ-45 × 1 for network connection, 10Base-T/100Base-TX, compatible with PJLink™ Built-in speaker 4.0 cm (1 1/16”) round shape × 1, output power: 10 W (monaural) Operation noise*³ 37 dB (lamp power: Normal), 35 dB (lamp power: ECO1), 29 dB (lamp power: ECO2) Cabinet materials Molded plastic Dimensions (W × H × D) 389 × 125*7 × 332 mm (15-5/16” × 4-29/32”*7 × 13-1/16”) Weight*⁶ Approximately 4.8 kg (10.6 lbs) Operating environment Operating temperature: 0–40 °C (32–104 °F)*⁸ (altitude: less than 1,200 m [3,937 ft]), 0–30 °C (32–86 °F) (altitude: 1,200–2,700 m [3,937 ft–8,858 ft] ), Operating humidity: 20–80 % (no conden Supplied accessories Wireless remote control unit × 1, Power cord with power cord holder x 1 (x 2 for UK and Asia), Software CD-ROM × 1 (Operating instructions, Multi Monitoring and Control Software, Logo Transfer Software, Wireless Manager ME software [PT-VZ585N/VW545N/VX615N only]), Batteries (AAA type × 2), RGB cable x 1, Lens cap x 1 Note: *¹ PT-VZ470 is not available in Taiwan. *² When the Standby Mode is set to ECO, network functions such as Power On via LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *³ Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *⁴ Pixel-repetition signal (dot clock frequency: 27.0 MHz) only. *⁵ No output when projector is on standby. *⁶ Average value. May differ depending on the actual unit. *⁷ With legs at shortest position. *⁸ When operating temperature is between 35 °C (95 °F) and 40 °C (104 °F) , lamp power automatically switches to ECO in order to protect the projector.